Sort by:
308 products
308 products
Accessories Information
- Guide Clip
- Clip to the spine of your knife to maintain a consistent sharpening angle
- Consider applying masking tape to the knife to reduce potential risk of scratching.
The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Knives not included
Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips. After adhering the wall holder is recommended to wait 24hrs before placing knives on.
*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*
The Walnut Magnetic Knife Holder is a minimal and elegant knife storage solution for those who may not have room for bulky knife blocks that take up vital bench space.
– Walnut timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H
- Sorry, knife not included
Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips. After adhering the wall holder is recommended to wait 24hrs before placing knives on.
*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Steel rings
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Leather-lined pocket ends for extra durability
- To be used in conjunction with blade guards
- Unfolded measurements: 650mm tall x 590mm wide
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Leather-lined pocket ends for extra durability
- To be used in conjunction with blade guards
- Unfolded measurements: 650mm tall x 590mm wide
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Steel rings
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Leather-lined pocket ends for extra durability
- To be used in conjunction with blade guards
- Unfolded measurements: 650mm tall x 590mm wide
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Steel rings
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Leather-lined pocket ends for extra durability
- To be used in conjunction with blade guards
- Unfolded measurements: 650mm tall x 590mm wide
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Leather-lined pocket ends for extra durability
- To be used in conjunction with blade guards
- Unfolded measurements: 650mm tall x 590mm wide
Double thickness, heavy-duty canvas knife roll.
- Elastic loops
- 6 slots for knives/tools
- Steel rings
- Fits knives with an overall length of 430mm
- Pocket width 65mm
- Unfolded measurements: 650mm tall x 590mm wide
This thoughtfully crafted holder is made from Walnut wood and stained black and allows you to easily and safely store your knives up to 210mm on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder. *Holder will not fit Deba, Cleaver, or any other non-traditionally shaped blades*
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
*Knife Not Included* This thoughtfully crafted holder is made from Walnut wood and allows you to easily and safely store your knives on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.
Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder.
Inner void for knife: 4mm wide x 65mm deep x 225mm high.
Total exterior measurements: 80mm wide x 130mm deep x 265mm high.
Don't scrape your knife along the board to scoop ingredients into your hand, just use the scoop! Once you use the food scoop, you'll wonder how you ever got by without one. We use ours every single meal we cook. Keeps your fingers safe and your knife edges sharp.
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.
