The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives. 

With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.   

A high grade 5000 grit ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.  

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

Accessories Information

• Guide Clip
• Clip to the spine of your knife to maintain a consistent sharpening angle
• Consider applying masking tape to the knife to reduce potential risk of scratching.

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #120 Very Coarse (Only for larger repairs)

Weight:

Dimensions:  

Accessories Information

Includes

• Yoshoku 1000/3000 Grit Deluxe Combination Stone (soak for 5-10minutes before use)
• Approx. stone dimensions: 180mm x 60mm x 30mm
• Guide Clip (Consider applying masking tape to the knife to reduce potential risk of scratching)
• Nagura Stone (flattening stone)
• Bamboo holder with rubber nonslip base
• Suitable for VG10, AUS8 & softer stainless applications
• Best paired with a lapping stone/plate for flatting between use
• Entry level stone

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #8000 Very Fine (For honing or edge polishing, use after the 5000)

Weight:

Dimensions:  

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #5000 Fine (For Honing, or for edge polishing, use after the 1000)

Weight: 668g

Dimensions: 210 x 70 x 15mm

Accessories Information

A synthetic marvel made by Morihei Japan, the Hishiboshi whetstones feel like natural stones, require no soaking, are extremely long lasting and offer excellent tactile feedback.  

Accessories Information

Suehiro is Japanese-made and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/6000 grit for dull knives or moderate/small chip repair followed by polishing
– Includes a sturdy plastic base with rubber feet
– Includes small Nagura stone

-  175mm x 60mm x ~11-14mm (per grit)
– 950g weight

These Naniwa are excellent bang for buck, albeit being a little smaller than traditional stones. Great for touching up of Petty/Bunka/Nakiri size blades and smaller Gyuto.

• Medium-Soft
• Whetstone grit ＃1000
• Whetstone Size 175×55×15mm
  

Accessories Information

Heavy duty, sturdy rubber-based whetstone holder. 
– Sturdy stainless steel and rubber construction 
– Heavy Duty Locking Screw
– Holds stones from 73mm to 218mm in length

– Weight: 577g

Truing Stone/Lapping Plate to keep the surface of your stones clean and level. 

Accessories Information

Suehiro are Japanese-made whetstones and some of the most popular in the market due to their consistent quality and excellent performance. We find the stones to have excellent feedback and even wear.
– Combination 1000/3000 grit for dull knives or moderate/small chip repair followed by finishing
– Includes sturdy plastic base with rubber feet
– Includes small Nagura stone

- 175mm x 60mm x ~11-14mm (per grit)
– 950g weight

Accessories Information

The Rockstar Series from Shapton improve on the GlassHR Series by removing the glass backing, and adding extra stone thickness for a longer lifespan. They are a hard stone that offers lighter feedback levels than other stones, but cut very fast, require no soaking, and are very slow to dish.  

• Overall size: 210 x 70 x 10mm
• Micron: 2
• Mesh: 6000
  
• No Case Included

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #1000 (Use in the early stages of sharpening)

Weight: 668g

Dimensions: 210 x 70 x 15mm 

Accessories Information

The Knife Maintenance Bundle was designed to offer incredible value for money with a 1000/3000 grit whetstone with base, guide clip and nagura stone for achieving sharp edges on your knives, and a 10" black ceramic steel honing rod to maintain these edges between sharpening.

• Best paired with a lapping stone/plate for flatting between use
• Entry level stone
• Guide Clip Use - Consider applying masking tape to the knife to reduce potential risk of scratching.

The high-grit ceramic honing rod is an essential tool for maintaining the sharpness of your Japanese knives. 

With correct use, it can double your period between sharpening, allowing for easy maintenance of your sharp whetstone edges.   

A high grade ceramic is wrapped around a rubber shock resistant core, protecting the ceramic from breaking if dropped.  

If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time. 

Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value. 

Grit: #1000 & #5000 (The ideal 2-step progression) 

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

The Chocera are one of Naniwa's premium whetstone offerings. Similar to the Shapton Glass but with better feedback, albeit a slightly faster wear rate. A thick, firm, high-end stone perfect for all steel stypes and applications.

Dimensions of stone - 210 x 70 x 20

Made In Japan

An excellent all round stone balancing cutting speed and wear rate delivering excellent value for money. Not as hard as Shapton Glass, comparable to the Kuromaku series. Splash and go, no need for soaking, ideal for beginners or intermediate sharpeners.

Dimensions of stone - 210 x 70 x 10mm

Made In Japan