Sort by:
267 products
267 products
Specifications
| Style: | Petty |
| Blade Length: | 150mm |
| Overall Length: | 360mm |
| Weight: | 148g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3.6mm |
| Spine Thickness @ Mid: | 1.9mm |
| Spine Thickness 1cm from tip: | 0.6mm |
| Blade Material: | SKD Core, Stainless Nashiji Cladding |
| Handle Material: | Octagon Dark Maple |
| HRC: | 63 |
Specifications
| Style: | Petty |
| Blade Length: | 135mm |
| Overall Length: | 277mm |
| Weight: | 81g |
| Blade Height @ Heel: | 31mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.9mm |
| Blade Material: | SKD Core, Stainless Nashiji Cladding |
| Handle Material: | Burnt Chestnut w/Buffalo Horn Bolster |
| HRC: | 63 |
Sp
Specifications
| Style: | Petty |
| Blade Length: | 150mm |
| Overall Length: | 277mm |
| Weight: | 81g |
| Blade Height @ Heel: | 31mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.9mm |
| Blade Material: | SKD Core, Stainless Tsuchime Cladding |
| Handle Material: | Burnt Chestnut w/Buffalo Horn Bolster |
| HRC: | 63 |
Sp
Specifications
| Style: | Petty |
| Blade Length: | 150mm |
| Overall Length: | 280mm |
| Height @ Heel: | 27mm |
| Spine Thickness @ Mid: | 2mm |
| Weight: | 60g |
| Blade Material: | SG2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Rosewood/Pakka |
| HRC: | ~63 |
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | 245mm |
| Weight: | 73g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.3mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | VG10 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Snakewood |
| HRC: | ~61 |
Knife Information
Yu Kurosaki is now one of the most well-known blacksmiths in Japan. He experienced a rapid rise to fame through his beautiful knife aesthetics, his thin grinds, and use of exotic steels like SG2, HAP40, and stainless-clad Blue Super. The Fujin was among one of the first lines of his that contributed to this fame. The striking Tsuchime finish is now instantly recognizable and is truly a piece to be experienced first-hand.
Best paired with a wooden saya and a 1000/6000 whetstone
Steel Breakdown
SG2 is a powder stainless steel made by The Takefu Special Steel Company in Takefu, Japan. It is, in our eyes, the ultimate combination of edge retention, stainless properties, and ease of sharpening. Having more carbon than the Carbon Steels like White and Blue, yet more stainless elements than VG10, knives using this steel are the best of both worlds without the downsides.
Knives with an SG2 core are becoming more prevalent in Japan due to these reasons. Their overall cost may be higher, but is well justified in our opinion.
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | ~250mm |
| Weight: | 80g |
| Blade Height @ Heel: | 30mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.4mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | SG2 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Rosewood |
| HRC: | ~63 |
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | 245mm |
| Weight: | 73g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.3mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | VG10 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Snakewood |
| HRC: | ~61 |
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | 245mm |
| Weight: | 73g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.3mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | VG10 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Snakewood |
| HRC: | ~61 |
Specifications
| Style: | Petty |
| Blade Length: | 120mm |
| Overall Length: | 245mm |
| Weight: | 73g |
| Blade Height @ Heel: | 47mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.3mm |
| Spine Thickness @ Mid: | 2mm |
| Blade Material: | VG10 Core, Stainless Tsuchime Clad |
| Handle Material: | Octagon Snakewood |
| HRC: | ~61 |
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.