Sort by:
1887 products
1887 products
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at 600g, these will make light work of even the hardest stones.
– Low 140 Grit for very fast removal of stone surface
– Replaceable abrasive sheet
These replacement blades are only compatible with the Suncraft Ever Peelers.
To reduce wastage the creators of the 'Ever Peeler' also made replaceable blades available so your peeler can be restored with a new blade if needed.
The 'Ever Peeler' took a lot of time and planning, after comparing over 200 types of peelers from around the world the final design was settled on. Completely made in Japan this peeler can not only peel potatoes and carrots but is able to shred cabbage too. Crafted to have the sharpest possible blade and also durability of this sharpness has resulted in a peeler of the highest quality.
Includes the small brass fish scaler and matte black brushed fish bone tweezers
Includes the large brass fish scaler and matte black brushed fish bone tweezers
Includes the small and large brass fish scaler and matte black brushed fish bone tweezers
*Available to Australian customers only
Specifications
| Style: | Gyuto |
| Blade Length: | 210mm |
| Weight: | 179gms |
| Blade Material: | SG2 Powdered Stainless Steel |
| Handle Material: | Black Pakkawood w/mosaic pin |
| HRC: | 64 |
An adorable porcelain rest for your chopsticks.
The spout shape is designed for easier pouring and greater control. Careful attention has also been paid to how the handle will be held, creating the best fit for drip coffee. The lid has a flat grip so that it can be placed upside down.
Colour: Matte Black
Width: 26.3 cm
Height: 15 cm
Diameter: 14.4 cm
Capacity: 1200ml
Weight: 0.6kg
Material: Stainless steel body & lid. Phenol resin handle and knob of lid.
Full instructions: https://global.hario.com/product/VKF-120.pdf
Put ground coffee in the strainer and slowly pour in water to brew. Leave in your refrigerator for about eight hours to brew.
Colour: Black
Width: 8.7 cm
Depth: 8.4 cm
Height: 30 cm
Diameter: 7.1 cm
Capacity: 650ml
Weight: 0.5kg
Material: Heatproof glass pot. Polyester resin filter. Polypropylene strainer. Silicone bottle spout and stopper
Full instructions: https://global.hario.com/product/FIC-70.pdf
Two holes of differing diameters enable steamed and non-steamed liquids to pour out separately. Fits inside paper filters for use with any size 02 dripper.
Colour: Transparent
Width: 13.7 cm
Height: 14.0 cm
Diameter: 11.7 cm
Capacity: 1-4 cups
Weight: 0.3kg
Material: PCT resin body. Acrylonitrile-styrene resin dripper
Full instructions: https://global.hario.com/product/PDA-02.pdf
Produced by Tetsu Kasuya, Asia first winner of the World Brewers Cup in 2016. A mini drip kettle for easy drip brewing of a single cup. This kettle is only intended to hold hot water. It cannot be placed on heat sources such as a gas flame or induction cooktop.
Colour: Matte Black
Width: 16.5 cm
Height: 10 cm
Diameter: 9 cm
Capacity: 300ml
Weight: 0.3kg
Material: Stainless steel
Full instructions: https://www.hario.com/product/KDK-300.pdf
Product Information
Produced by Tetsu Kasuya, Asia first winner of the World Brewers Cup in 2016. This black cupping bowl obscures the color so that you can discover what really tastes best, without being swayed by appearances.
Colour: Black
Width: 14 cm
Height: 12 cm
Diameter: 10.2 cm
Capacity: 1-4 cups
Weight: 0.4kg
Material: Porcelain dripper. Polypropylene measuring spoon
Full instructions: https://global.hario.com/product/KDC-02-B.pdf
Produced by Tetsu Kasuya, Asia first winner of the World Brewers Cup in 2016. A mini drip kettle for easy drip brewing of a single cup. This kettle is only intended to hold hot water. It cannot be placed on heat sources such as a gas flame or induction cooktop.
Colour: Matte Black
Width: 19.6 cm
Height: 11 cm
Diameter: 10 cm
Capacity: 500ml
Weight: 0.4kg
Material: Stainless steel
Full instructions: https://www.hario.com/product/KDK-500.pdf
Product Information
A dripper that can brew coffee in a single pour. This dripper lacks internal ribbing, so paper filters stick to it as coffee flows down the star-shaped grooves to slowly brew. You can also remove the holder to place just the dripper on a stand to brew.
Colour: White
Width: 14.3 cm
Height: 9.5 cm
Diameter: 11.7 cm
Capacity: for 1-2 cups
Weight: 0.3kg
Material: Ceramic body & Polypropylene holder.
Full instructions: https://www.hario.com/product/VDMU-02_porcelain.pdf
The charm of copper!
Copper's excellent thermal conductivity makes for fast, even cooking.
Product size: approx. 302 x 217 x 153 mm
Weight: approx. 1230g
Full water capacity: 2.7L
Made in Japan
Knife Information
A traditional Japanese tool for woodworking and leather crafting. It has a single bevel edge much like Japanese sushi knives, meaning it can be sharpened to have an extremely sharp edge.
Brand: Morihei
Profile: Kiridashi
Steel Type: Blue #1 (Aogami)
Total Length: 205mm
Blade Length: 60mm
Bevel Symmetry: Single Bevel
Hand Orientation: Right Handed
Weight: 98g
Knife Information
A traditional Japanese tool for woodworking and leather crafting. It has a single bevel edge much like Japanese sushi knives, meaning it can be sharpened to have an extremely sharp edge.
Brand: Morihei
Profile: Kiridashi
Steel Type: Blue #1 (Aogami)
Total Length: 213mm
Blade Length: 67mm
Bevel Symmetry: Single Bevel
Hand Orientation: Right Handed
Weight: 138g
Accessory Information
The Atoma Diamond Lapping Plates by Tsuboman Japan are widely recognised as the superior solution for flattening your whetstones. Strong, sturdy, and weighing in at 600g, these will make light work of even the hardest stones.
– Semicourse 400 Grit for fast removal of stone surface
– Replaceable abrasive sheet
- 7.5cm x 21cm plate size
Specifications
| Style: | Bunka |
| Blade Length: | 170mm |
| Overall Length: | 310mm |
| Weight: | 143g |
| Blade Height @ Heel: | 49mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.5mm |
| Blade Material: | Ginsan Core, Stainless Migaki Clad |
| HRC: | 61 |
| Handle: | Octagon Ebony |
We cannot fit these handles to any blades in our inventory for you, handle sales are individual only
Length: 130mm
Weight: 42g
Fancy up your kitchen knives with a custom handle! This stunning Octagon handle is crafted from Mausoleum Wood and Blonde Buffalo Horn, and is suitable for Bunka/Nakiri blades. This double-blonde combination looks fantastic on any blade finish, dark or light.
Handles are made from natural timber and as such can vary in tone, grain, and general appearance. Some are lighter/darker than others.
We cannot fit these handles to any blades in our inventory for you, handle sales are individual only
Length: 115mm
Weight: 28g
Chefs Edge will not accept responsibility if the wrong-sized handle is selected.
Fancy up your kitchen knives with a custom handle! This stunning Octagon handle is crafted from Mausoleum Wood and Blonde Buffalo Horn, and is suitable for Petty blades. This double-blonde combination looks fantastic on any blade finish, dark or light.
Handles are made from natural timber and as such can vary in tone, grain, and general appearance. Some are lighter/darker than others.
Specifications
| Style: | Gyuto |
| Blade Length: | 235mm |
| Overall Length: | 385mm |
| Weight: | 209g |
| Blade Height @ Heel: | 50mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 3.5mm |
| Spine Thickness @ Mid: | 2mm |
| Spine Thickness 1cm from tip: | 0.8mm |
| Blade Material: | Blue 2 Core (Pre-etched), Soft Iron Kurouchi Damascus Clad |
| Handle Material: | Octagon Bubinga |
| HRC: | 62 |
If you asked: "Give me a stone that isn't too soft, isn't too hard, has great feedback, is splash and go, and has its own base but won't cost me an arm and a leg,", we're reaching for the Shapton Kuromaku every time.
Somewhat reminiscent of the Chosera (albeit with a slightly thinner stone), the Kuromaku are a splash and go dream. Softer than the Glass HR, harder than Suehiro Cerax, they represent excellent value.
Grit: #120 Very Coarse (Only for larger repairs)
Weight:
Dimensions:
Accessories Information
Includes Large & Small Quenelle Spoons, Plating Spatula, Plating Tweezer Bundle, Plating Spoon, Saucing Spoon, Fishbone Tweezers and Waxed Canvas Tool Pouch.
Specifications
| Style: | Gloss & Brushed Silver |
| Construction: | Stainless Steel |
Specifications
| Style: | Gyuto |
| Blade Length: | 240mm |
| Overall Length: | 400mm |
| Weight: | 158g |
| Blade Height @ Heel: | 52mm |
| Bevel: | Double Bevel |
| Spine Thickness @ Heel: | 2.9mm |
| Spine Thickness @ Mid: | 1.9mm |
| Spine Thickness 1cm from tip: | 1.2mm |
| Blade Material: | Blue Super Core, Stainless Clad, Kurouchi Finish |
| Handle Material: | Octagon Walnut w/Pakkawood Bolster |
| HRC: | ~63 |
Chef's Edge
We pride ourselves on offering an unparalleled selection of Japanese knives. From the versatile Gyuto and the precise Santoku to specialized knives like the Nakiri and Yanagiba, each knife is handpicked for its quality and performance.