These 4 piece timber knife holders are made in Japan, and are the perfect solution to showcase your knives. Knives not included.

- Timber construction

- 29cm x 36cm x 22cm (Widest x Height x Depth)

- top pegs 15.5cm apart

- bottom pegs 25cm apart

This benchtop holder allows you to easily and safely store your knives on a magnetized pad whilst keeping your knives on display. *Knives not included*

Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).

Knife pad size: 72mm wide at top x 100mm wide at base x 311mm high.

Total holder measurements: 143mm wide x 165mm deep x 350mm high.

This benchtop holder allows you to easily and safely store your knives on a magnetized pad whilst keeping your knives on display. *Knives not included*

Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).

Knife pad size: 72mm wide at top x 100mm wide at base x 311mm high.

Total holder measurements: 143mm wide x 165mm deep x 350mm high.

The Black Magnetic Knife Holder is a minimal and elegant knife storage solution for those who may not have room for bulky knife blocks that take up vital bench space.

– Walnut timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H

- Sorry, knife not included

Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips  

*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*

The Maple Magnetic Knife Holder is a minimal and elegant knife display and storage solution for those who may not have room for bulky knife blocks that take up vital bench space.

– Maple timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H

- Knives not included

Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips  

*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*

The Walnut Magnetic Knife Holder is a minimal and elegant knife storage solution for those who may not have room for bulky knife blocks that take up vital bench space.

– Walnut timber construction
– Strong adhesive strips runs along entire back of holder, or hang with 2 screws
– Powerful Neodymium Magnets
– 40cm L x 2cm W x 6.5cm H

- Sorry, knife not included

Adhesive Strip installation information; ensure wall is level and free of oil or dirt prior to the use of adhesive strips  

*Chefs Edge is not liable for any damage caused to knives or property while using the magnetic holder*

Double thickness, heavy-duty canvas knife roll. *(Now with embroidered logo))

- Elastic loops

- 6 slots for knives/tools

- Steel rings

- Fits knives with an overall length of 430mm

- Pocket width 65mm

- Leather-lined pocket ends for extra durability

- Unfolded measurements: 650mm tall x 590mm wide

Double thickness, heavy-duty canvas knife roll. 

- Elastic loops

- 6 slots for knives/tools

- Steel rings

- Fits knives with an overall length of 430mm

- Pocket width 65mm

- Leather-lined pocket ends for extra durability

- Unfolded measurements: 650mm tall x 590mm wide

Double thickness, heavy-duty canvas knife roll. 

- Elastic loops

- 6 slots for knives/tools

- Steel rings

- Fits knives with an overall length of 430mm

- Pocket width 65mm

- Leather-lined pocket ends for extra durability

- Unfolded measurements: 650mm tall x 590mm wide

Double thickness, heavy-duty canvas knife roll. 

- Elastic loops

- 6 slots for knives/tools

- Steel rings

- Fits knives with an overall length of 430mm

- Pocket width 65mm

- Leather-lined pocket ends for extra durability

- Unfolded measurements: 650mm tall x 590mm wide

Double thickness, heavy-duty canvas knife roll. 

- Elastic loops

- 6 slots for knives/tools

- Steel rings

- Fits knives with an overall length of 430mm

- Pocket width 65mm

- Unfolded measurements: 650mm tall x 590mm wide

This benchtop holder allows you to easily and safely store your knives on a double sided magnetized pad whilst keeping your knives on display. *Knives not included*

Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).

Total Width: 235mm 

Total Depth: 115mm

Weight: 2.6kg

Usable face area: 310mm H x 210mm W 

This benchtop holder allows you to easily and safely store your knives on a double sided magnetized pad whilst keeping your knives on display. *Knives not included*

Most suited for WA-handled knives, heavier handles may cause the knife to sit on an angle (e.g. western handle and full metal handle knives).

Total Width: 235mm 

Total Depth: 115mm

Weight: 2.6kg

Usable face area: 310mm H x 210mm W 

Habitat Small Double-Sided Strop, the essential last step of deburring the edge of your knife to ensure maximum sharpness.
– Dual Sided Leather
– Shaped handle for ease of use
– Green Compound included
– 148mm Leather Length

This thoughtfully crafted holder is made from Walnut wood and stained black and allows you to easily and safely store your knives up to 210mm on a benchtop with a small footprint, whilst being able to see the blades through the open-sided design.

Before purchasing please ensure your knives will fit with the provided dimensions. Knives that are thicker, longer, or taller than the provided dimensions will not fit in the holder. Chefs Edge will not accept responsibility if your knives don't fit in the holder. *Holder will not fit Deba, Cleaver, or any other non-traditionally shaped blades*

Inner void for knife: 4mm wide x 65mm deep x 225mm high.

Total exterior measurements: 80mm wide x 130mm deep x 265mm high.